Preparing Masonry Jobsites for Summer Weather

Words: Macy Williams

Spring is in the air, and summer is right around the corner. With that in mind, it’s time for all of us in the masonry industry to start preparing for warmer weather. It is very important that we consider the risks associated with working in the summer heat. As the weather warms up, masonry job sites face unique challenges that require careful preparation and planning. For mason contractors and foremen, ensuring that workers and equipment are ready for the heat is crucial to maintaining productivity and safety. From implementing heat regulations and adjusting work schedules to cleaning and inspecting tools, there are several key steps that can help mitigate the effects of rising temperatures. This article provides essential tips and advice to help masonry professionals navigate the transition to warmer weather, ensuring smooth and efficient operation on job sites.

Heat Regulations and Worker Safety

Proper hydration is critical when working in warmer temperatures. At a minimum, workers should be provided with cooled water. If possible, it is best practice to set up hydration stations with water and electrolyte drinks. Encourage your workers to drink regularly, even if they don't feel thirsty. Plan regular breaks in shaded or covered areas. Short, frequent breaks are more effective than longer, infrequent ones.

It is a good idea to wear protective gear, such as lightweight clothing and accessories that provide sun protection. We recommend breathable, moisture-wicking clothing to keep workers cool. Light-colored clothing reflects sunlight and reduces heat absorption as well. Additional options are shade attachments for hard hats, sunglasses, and sunscreen. Educate workers on the importance of sun protection throughout the day.

It is very important to engage your workers in heat stress training and emergency procedure discussions. Conduct training sessions on recognizing heat stress symptoms like dizziness, nausea, and excessive sweating. Teach workers how to respond and seek help. Establish clear procedures for dealing with heat-related emergencies. Ensure all workers know who to contact and where to go for help. Daily huddles and toolbox talks are a perfect opportunity to have these discussions.

Job Site Adjustments

Though it may not be feasible in all circumstances, scheduling flexible working hours can be an effective way to navigate the summer weather. When possible, adjust work hours to cooler parts of the day. Early morning and late afternoon shifts can help avoid the peak heat. You can also rotate workers to ensure no one is exposed to heat for extended periods. This helps prevent fatigue and heat stress. Shade and cooling areas are extremely helpful when they can be utilized. Whenever possible, set up temporary shade structures like tents or canopies. Ensure they are easily accessible from all work areas. Cooling stations can be equipped with fans, misting systems, or portable air conditioners in rest areas. These can significantly reduce heat stress during breaks. Of course, the size of the job site must be taken into consideration when planning out these areas. On larger jobs, the general contractor controlling the site may already have some of these measures in place for the workers.

Material Handling

In the world of masonry, we use temperature-sensitive materials on a regular basis. Handling mortar and concrete at high temperatures can affect the curing process of mortar and concrete. In some cases, additives are used to slow down curing and prevent cracking. We recommend planning your mixing activities to minimize the need for retempering on the mortar boards. This helps the masons to be more efficient and reduces waste. Store cementitious materials in shaded areas or indoors to prevent heat damage. Avoid direct sunlight and high temperatures.

Equipment Maintenance

Regular cleaning and maintenance of tools and equipment are essential during high temperatures. Use appropriate cleaning procedures to remove dirt, grime, and mortar residue from mortar mixers and tools throughout the day. Try to prevent mortar residue from becoming hard inside of the drum of the mixer. This will keep your mortar mix ratio consistent and allow your equipment to run efficiently. Regular cleaning prevents rust and ensures tools are ready for use. Keeping clean tools will make them lighter and easier to use, which helps to reduce the fatigue from working in the summer heat.

Create a checklist for inspecting tools for damage or wear. Look for cracks, dull edges, and loose handles. Replace or repair damaged tools promptly. Store tools in a cool, dry place to prevent heat damage. Use toolboxes or racks to keep them organized and protected from direct sunlight. Implement a regular maintenance schedule to ensure tools are always in top condition.

Conclusion

Preparing masonry job sites for warmer weather is essential for maintaining productivity and ensuring the safety of workers. By focusing on implementing heat regulations, adjusting work schedules, proper handling of materials, and equipment maintenance, masonry contractors and foremen can effectively mitigate the challenges posed by high temperatures. These proactive steps not only enhance the efficiency of operations but also contribute to a healthier and more comfortable work environment. As the industry gears up for the warmer months, embracing these practices will help masonry professionals stay ahead and thrive in the heat. On behalf of Brodie Contractors, Inc., we wish you all a safe and productive summer! #MASONRYSTRONG

Preparing Masonry Jobsites for Summer Weather

About: Featured

Built to Endure: Exploring the All-Weather Strength and Longevity of Manufactured Stone Veneer

Meet the Next (Fourth!) Generation at PROSOCO

Tips For Maintaining A Jobsite

Not-So-Boring Brick: Gadi House, India