Masonry Magazine August 1993 Page. 22
CAST AND SIMULATED STONE
TECHCRETE ARCHITECTURAL PRECAST
12920 Alex Andria Dr., Opa Locka, FL, 33054. Phone: 305/688-1461. Fax 305/688-3107. Tom Van Bree, President, Gary Bozyard, Plant Manager. Manufacturers of simulated coral stone cast, columns, molding veneer, balustrades and sills.
STONE PRODUCTS CORP.
PO Box 270, Napa, CA, 94559. Phone 800/255-1727, Fax 707/255-5572. Janet Kepher, Sales Promotion Manager. Manufacturers of Cultured Stone, a lightweight alternative to full thickness stone. It is fast and easy to install and requires no additional foundations or wall ties. They are suitable for a wide variety of exterior and interior applications, such as fireplace and chimney facings, hearths and stove backwalls and pads.
TERRA COTTA & CAST STONE MANUFACTURING
22001 W. 83rd St., Shawnee, KS 66227. Phone: 913/422-7575. Fax 913/422-7272. Dennis McBride, Owner, Pat Aistrup, Estimator. Manufacturers of custom made natural aggregate stone molded to architects specifications. They are capable of producing stone which meets or exceeds CSI standards with a high PSI rating and virtually zero efflorescence. Their stone can also be color matched.
THORO SYSTEM PRODUCTS
7800 NW 38th St, Miami, FL, 33166. Phone: 305/597-8100. Fax 305/592-9760. Judy Epstein, Communications Manager, Bruce Lyons, Marketing Manager. Their Granstone Finish System is a protective, multi-coat, surface applied coating which provides a simulated granite and mortar joint finish on a variety of substrates. This system can be worked to produce a range of surface effects to resemble honed, fine rubbed, stippled, shot ground or sawn granite.
VERONA MARBLE COMPANY
8484 Endicott Ln., Dallas, TX, 75227. Phone 214/381-8405. Fax: 214/381-8333. Todd Ward, National Sales Manager, John Ganster, Vice President. Manufacturers of patterned pavers made from granite and porfida in a cement matrix with VERONA MARBLE COMPANY'S patterned paver concrete backings. Installation is done in a conventional manner using either a sand, mud or clay bed paved over plastic supports. The product is available in a standard 16" x 16" format, 11½ inches thick with five colors and three finishes to choose from.
ROUGH TERRAIN FORKLIFTS
GRADALL
406 Mill Ave. SW, New Philadelphia, OH, 44663. Phone 216/339-2211, Fax 216/339-8468. Kerry L. Blaser, Marketing Manager. Manufacturers of the Gradall G3-Series of rough terrain forklifts with lift capacities ranging from 5,000 to 6,000 lbs. and lift heights to 12 feet. Engines available range from 18 to 50 horsepower. Formerly known as Prime Mover Products.
PETTIBONE MICHIGAN
1140 Superior Ave, PO Box 368, Baraga, MI, 49908. Phone 906/353-6611, Fax 906/ 353-6325. Wes Kaurala, Sales Coordinator. Manufacturers of seven models of rough terrain forklifts ranging from 5,500 to 10,000 lb. lift capacity and 28 to 58 feet of lift height.
SELLICK EQUIPMENT
358 Erie St. North, Harrow, ON, Canada, NOR 1G0. Phone 519/738-2255, Fax 519/738-3477. Howard Sellick, President, David Sellick, Vice President, Ron Wood, Operations Manager. Manufacturers of a wide range of straight mast forklifts ranging from 4,000 to 16,000 lb. capacities with lift heights available to 30 feet. Gasoline, diesel, propane or natural gas engine options are available as is two or four wheel drive. They also make two telescopic boom handlers with 7,000 and 9,000 lb. capacities and a 37 foot lift with a 2312 foot reach.
SPYDER INCORPORATED
PO Box 266106, Houston, TX, 77207-6106. Phone 800/231-5916. Earl Hankamer, President. Makers of a portable, truck mountable, all terrain forklift with lift capacities from 3,000 to 5,500 lbs. Two and four wheel models are available with reach forks as standard equipment allowing unloading from one side of a flatbed truck.
TELEDYNE PRINCETON
944 W. Walnut St., PO Box 246, Canal Winchester, OH, 43110. Phone 614/837-9096, Fax 614/837-2105. Rodger L. Osborne, Director of Sales, John W. Streit, Manager of Dealer Development, Larry W. Lehner, National Account Manager. Makers of the Piggyback material handler which comes in six models and can lift and load 3,000 to 5,500 lbs. with complete stability. It is available in a series of engine types in both gasoline and diesel models.
TRAK INTERNATIONAL
369 W. Western Ave., Port Washington, WI, 53074. Phone 414/284-5571, Fax 414/284-4955. Curt Laetz, Vice President Marketing, Paul Roblee, Director of Sales, Dave Horner, Product Manager. The Sky Trak telescopic handlers come in five models with load capacities of 5,000 to 10,000 lbs. and lift heights from 28 to 42 feet. Sky Traks feature the Trak-Attach quick attach system which allows easy connecting of optional attachments for a high level of versatility on the job.